The Top Two Tips to deal with "NTLDR Is Missing" error message?

Last post, I was shown how one tip to deal with "NTLDR Is Missing" error message, now I will show another tip to face this bad error.

Tip Two to Deal With "NTLDT is Missing" ——

1. Use Windows 2000 installation disk to restart the computer, or use Windows 2000 CD-ROM to restart the computer First;

2. On "Welcome to Setup" screen, press R key to repair Windows 2000 installed;

3. Then Press C bond to using the "Recovery Console" to repair the installation of Windows 2000;

4. And the type of Windows to repair the installation of the corresponding number, and then press Enter key. For example, type 1, and then press Enter key.
You can check Microsoft Articles——
229716 Description of the Windows Recovery Console

5. Type the administrator password, and then press Enter key.

6. Type map, and then press ENTER key. Note allocated to the Windows 2000 CD-ROM that contains the CD-ROM drive, drive.

7. Type the following command, in order for each type according to the ENTER key, which you drive in this paper, "Method 2: Use Recovery Console" in Step 4 of the drive, type:
copy drive: \ i386 \ ntldr c: \

copy drive: \ i386 \ ntdetect.com c: \
If you are prompted to overwrite the existing file, type y, and then press Enter key.

Note: The order of these, ntldr and c: \, as well as between ntdetect.com and c: \ space between each one.


8. Type the following command, and then press ENTER key:
type c: \ Boot.ini
A similar list is as follows:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
      

If you receive the following message, the Boot.ini file may be missing or damaged:

The system cannot find the file or directory specified.

That's why happened DTLDT Is Missing error message.

9. If the Boot.ini file is missing or damaged, create a new one. To do this, follow these steps:
a. Use a text editor such as Notepad or Edit.com to create a following similar to the boot loader:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]

102873 BOOT.INI and ARC Path Naming Conventions and Usage

301680 HOW TO：Create a Boot Disk for an NTFS or FAT Partition in Windows

b. the file is saved to disk as Boot.ini.
NOTE: If you are using Notepad to create the file, make sure. Txt extension does not Boot.ini file name attached to the back.

c. In the Recovery Console command prompt, type the following command to copy the Boot.ini file from the floppy disk into the computer:
copy a: \ Boot.ini c: \

10. Type exit, and then press ENTER key. The computer will restart.


OK, That's done! DO you understand all steps?
That's great, for do not happen this error, please check your computer often, scan registry and fix all errors.