The Top Three Tip to deal with "NTLDR Is Missing" error message?

ok,let's go on, This post I will show us the Three Tip to how to fix NTLDR Is Missing!
Let's begin to——

1. Insert the Windows 2000/xp CD-ROM computer's CD-ROM drive or DVD-ROM drive and restart Windows 2000/xp Setup.

2. In "Welcome to Setup" page, according to the R key.

3. "Windows 2000/xp repair options" on the page, according to the R key.

4. When you are prompted to "repair the following options to choose a" when, according to the M button.

5. Arrow up by two, select "test Windows 2000/xp system files" and then press ENTER key made clear choice.

6. Based on the down arrow and select "continue (the implementation of the selected tasks)", and then press ENTER key. Will appear the following message:
You need an Emergency Repair disk for the Windows 2000/xp
installation you want to repair. (to repair the installation of Windows 2000/xp, you need an emergency repair disk.)

7. Finally step to fix NTLDR Is Missng, Based on your specific situation of the following:
• If you have an emergency repair disk, follow these steps:
a. according to the ENTER key.
b. emergency repair of the computer to insert the floppy disk drive, and then press Enter key.
c. Follow the instructions to repair the installation, and then restart the computer.
- Or --
• If you do not have an emergency repair disk, follow these steps:
a. according to the L button. You will receive similar to the following:
Setup has found Windows 2000/xp in the following folder:
Drive: \ WINNT "Microsoft Windows 2000/xp"

b. according to the ENTER key.

Setup will check the disk, and then complete the repair process. Then Scan your computer Regstiry to check errors!

The Top Two Tips to deal with "NTLDR Is Missing" error message?

Last post, I was shown how one tip to deal with "NTLDR Is Missing" error message, now I will show another tip to face this bad error.

Tip Two to Deal With "NTLDT is Missing" ——

1. Use Windows 2000 installation disk to restart the computer, or use Windows 2000 CD-ROM to restart the computer First;

2. On "Welcome to Setup" screen, press R key to repair Windows 2000 installed;

3. Then Press C bond to using the "Recovery Console" to repair the installation of Windows 2000;

4. And the type of Windows to repair the installation of the corresponding number, and then press Enter key. For example, type 1, and then press Enter key.
You can check Microsoft Articles——
229716 Description of the Windows Recovery Console

5. Type the administrator password, and then press Enter key.

6. Type map, and then press ENTER key. Note allocated to the Windows 2000 CD-ROM that contains the CD-ROM drive, drive.

7. Type the following command, in order for each type according to the ENTER key, which you drive in this paper, "Method 2: Use Recovery Console" in Step 4 of the drive, type:
copy drive: \ i386 \ ntldr c: \

copy drive: \ i386 \ ntdetect.com c: \
If you are prompted to overwrite the existing file, type y, and then press Enter key.

Note: The order of these, ntldr and c: \, as well as between ntdetect.com and c: \ space between each one.


8. Type the following command, and then press ENTER key:
type c: \ Boot.ini
A similar list is as follows:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
      

If you receive the following message, the Boot.ini file may be missing or damaged:

The system cannot find the file or directory specified.

That's why happened DTLDT Is Missing error message.

9. If the Boot.ini file is missing or damaged, create a new one. To do this, follow these steps:
a. Use a text editor such as Notepad or Edit.com to create a following similar to the boot loader:

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT

[operating systems]

102873 BOOT.INI and ARC Path Naming Conventions and Usage

301680 HOW TO：Create a Boot Disk for an NTFS or FAT Partition in Windows

b. the file is saved to disk as Boot.ini.
NOTE: If you are using Notepad to create the file, make sure. Txt extension does not Boot.ini file name attached to the back.

c. In the Recovery Console command prompt, type the following command to copy the Boot.ini file from the floppy disk into the computer:
copy a: \ Boot.ini c: \

10. Type exit, and then press ENTER key. The computer will restart.


OK, That's done! DO you understand all steps?
That's great, for do not happen this error, please check your computer often, scan registry and fix all errors.

The Top One Tips to deal with "NTLDR Is Missing" error message?

It maybe a so badly error message that most of us will see sometime during our time on a computer, Special when you start a computer with Windows 2000.

NTLDR is missing
Press any key to restart

so in this articles, I will be show us the three tips to troubleshooting "NTLDR is Missing" error message.Before it, please Make sure your computer is to install the latest version of the BIOS.

Tip One to Deal With "NTLDR is Missing" ——
1. Create a file that contains the following Windows 2000 boot disk: Ntldr; Ntdetect.com; Boot.ini; Ntbootdd.sys.

If you don't know how to creat boot disk, please go to Microsoft check Article ID ——

301680 HOW TO：Create a Boot Disk for an NTFS or FAT Partition in Windows

101668 How to Use a Windows Boot Disk to Prevent Boot Failure
or Scan your computer and fix computer errors fast!

2. Then Edit Boot.ini to point to the correct hard disk controller and where Windows is installed in the right volumes.

If you don't know how to Edit Boot.ini, please go to Microsoft check Article ID ——
311578 HOW TO： Edit the Boot.ini File in Windows 2000

3. Insert the boot disk to the computer's disk drive, and then restart the computer.

4. Copy Ntldr, Ntdetect.com, Boot.ini from the boot disk to the local hard disk partition system.


ok, done, that's first tips to deal with Ntldt is missing error message, For the Stability of Computer, Please scan you Registry and repair errors!